Faux Stone texture expert


8am - 5pm / Mon - Fri

Do not use water as a diluent

Like stone paint dilution method that can be used for each coating

  • Primer: It does not need to be diluted. It can be sprayed directly after being opened into the barrel. If it needs to be diluted, it can be diluted with water.
  • Elastic Coat: It can be diluted with 5% water.
  • Main Coat (ADD STONE Coating Main Material): No dilution is required, and if the evaporation concentration changes, it can be diluted with ADD Stone's special thinner or water.
  • Sealer: It can be diluted with 50% water.

  Special thinner:It is recommended to use the special diluent of ADD STONE for better dilution and maintain the suspending concentration of the pigment. The special diluent can protect the ADD STONE Faux-Stone texture Coating from deterioration.

  ADD STONE Faux-Stone Coating main material is water-based acrylic resin. The various microorganisms contained in the diluted water will decompose the components of the stone-like paint. After storage, it will cause deterioration, odor, and even color change or paint damage.

  Diluted with water:If there is no special thinner, it can be diluted with pure water, but the diluted paint must be used immediately and cannot be stored.

Pin It